NA2-N Area Sensor Panasonic

Liên hệ VIET FA

Ms. Duyen Truong:

+84-964 654 007

Mr. Nguyen Viet:

+84-79 818 0088

DataSheet

Danh mục: Cảm biến dạng CurtainsThẻ: Cảm biến an toàn, Cảm biến Panasonic, Cảm biến vùng Thương hiệu: Panasonic

Maximum sensing height 540 mm21.260 in(28 beam channels)

Slim body of just 13 mm0.512 inthick

The slim-bodied NA2-N series fits right in your equipment, since it is only 13 mm0.512 inthick and 30 mm1.181 inwide. It dose not get in the way of your access to the machine.

6 types of sensing height

In addition to the conventional 12, 16, and 20 beam channel types, this new lineup includes 8, 24, and 28 beam channel types. A wide model variation is provided with sensing heights from 540 mm21.260 in(28 beam channels) to 140 mm5.512 in(8 beam channels).

Globally usable

It conforms to the EMC Directive and obtains the UL Recognition. Products that has obtained the Korea’s S-mark certification are available as well.
Moreover, PNP output type which is much in demand in Europe is also available.

Clearly visible wide job indicator

Both the receiver and the emitter feature job indicators, 102 mm4.016 inwide, with red bright LEDs.
When the sensing output and the job indicator input are connected, the job indicator can be used as a large operation indicator.

Specifications

Number of beam channels			8	12	16	20	24	28
Model No.		NPN output	NA2-N8	NA2-N12	NA2-N16	NA2-N20	NA2-N24	NA2-N28
Model No.		PNP output	NA2-N8-PN	NA2-N12-PN	NA2-N16-PN	NA2-N20-PN	NA2-N24-PN	NA2-N28-PN
CE marking directive compliance			EMC Directive, RoHS Directive
Sensing height			140 mm 5.512 in	220 mm 8.661 in	300 mm 11.811 in	380 mm 14.961 in	460 mm 18.110 in	540 mm 21.260 in
Sensing range			5 m16.404 ft
Beam pitch			20 mm0.787 in
Sensing object			φ30 mmφ1.181 inor more opaque object (completely beam interrupted objects)
Supply voltage			12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption	Emitter	Job indicator ON	0.7 W or less	0.8 W or less	0.9 W or less	1.0 W or less	1.1 W or less	1.2 W or less
	Emitter	Job indicator OFF	0.6 W or less	0.7 W or less	0.8 W or less	0.9 W or less	1.0 W or less	1.1 W or less
	Receiver	Job indicator ON	0.7 W or less	0.8 W or less	0.9 W or less	1.0 W or less	1.1 W or less	1.2 W or less
	Receiver	Job indicator OFF	0.6 W or less	0.7 W or less	0.8 W or less	0.9 W or less	1.0 W or less	1.1 W or less
Output			<NPN output type> NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)<PNP output type> PNP open-collector transistor • Maximum source current: 100 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
		Utilization category	DC-12 or DC-13
		Output operation	ON when all beam channels are received (OFF when one or more beam channels are interrupted)
		Short-circuit protection	Incorporated
Response time			10 ms or less (12 ms or less when the interference prevention function is used)
Indicators		Emitter	Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Indicators		Receiver	Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit.
Interference prevention function			Incorporated
Test input (emission halt) function			Incorporated
Pollution degree			3 (Industrial environment)
Protection			IP40(IEC)
Ambient temperature			–10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed), Storage: –10 to +60 ℃+14 to +140℉
Ambient humidity			35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance			Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability			1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance			20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance			10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each
Shock resistance			500 m/s²acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element			Infrared LED (Peak emission wavelength: 870 nm0.034 mil(Note 3), modulated)
Material			Enclosure: Heat-resistant ABS, Lens cover: Polyester, Indicator cover: Acrylic
Cable			0.2 mm²4-core cabtyre cable, 3 m9.843 ftlong
Cable extension			Extension up to total 25 m82.021 ftis possible for both emitter and receiver, with 0.2 mm², or more, cable.
Weight (Total weight of emitter and receiver)			Net weight: 350 g approx. Gross weight: 550 g approx.	Net weight: 400 g approx. Gross weight: 600 g approx.	Net weight: 450 g approx. Gross weight: 650 g approx.	Net weight: 500 g approx. Gross weight: 700 g approx.	Net weight: 570 g approx. Gross weight: 750 g approx.	Net weight: 650 g approx. Gross weight: 800 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4℉.
2) Obtain the current consumption from the following equation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) In case of NA2-N8 (when job indicator lights up)
When the supply voltage is 12 V, the current consumption of the emitter is: 0.7 W ÷ 12 V ≈ 0.058 A = 58 mA.
3) Peak emission wavelength has been changed from production in March, 2017.

Order guide

Type	Sensing range	Model No. (Note)	Number of beam channels	Sensing height (mmin)	Output
NPN output type	5m 16.404 ft	NA2-N8	8	140 5.512	NPN open-collector transistor
		NA2-N12	12	220 8.661
		NA2-N16	16	300 11.811
		NA2-N20	20	380 14.961
		NA2-N24	24	460 18.110
		NA2-N28	28	540 21.260
PNP output type		NA2-N8-PN	8	140 5.512	PNP open-collector transistor
		NA2-N12-PN	12	220 8.661
		NA2-N16-PN	16	300 11.811
		NA2-N20-PN	20	380 14.961
		NA2-N24-PN	24	460 18.110
		NA2-N28-PN	28	540 21.260

Note :	The model No. with “P” shown on the label affixed to the product is the emitter, “D” shown on the label is the receiver.

5 m16.404 ftcable length type

5 m16.404 ftcable length type (standard: 3 m9.843 ft) is also availble for NPN output type.
When ordering this type, suffix “-C5” to the model No.
(e.g.) 5 m16.404 ftcable length type of NA2-N8 is “NA2-N8-C5”.

Products that have obtained Korea’s S-mark certification

There are NPN output type products (excluding the 5 m cable length type) that have obtained Korea’s S-mark certification.
When ordering this type, suffix “-K” to the model No.
(e.g.) The NA2-N8 with Korea’s S-mark is “NA2-N8-K”.

NA2-N12