Cảm biến quang Panasonic CX-400 Ver.2 Compact Photoelectric Sensor

Công ty Tự Động Hóa VIETFA cung cấp tất cả dòng cảm biến quang CX-400 Ver.2  của hãng Panasonic.

Liên hệ VIET FA

+84-964 654 007 sales@vietfa.com.vn Danh mục:
Maker: Panasonic
DataSheet
Brands:
Brands

Đối với Sê-ri CX-400, người dùng có nhiều lựa chọn Cảm biến quang điện siêu nhỏ gọn để tùy ý sử dụng. Sê-ri bao gồm ba loại chùm tia, năm loại phản xạ ngược, bốn loại phản xạ khuếch tán và bốn loại lượng giác với triệt tiêu tiền cảnh/hậu cảnh. Với ASIC mới (mạch tích hợp dành riêng cho ứng dụng), các Cảm biến yêu cầu năng lượng ít hơn tới 60% so với trước đây.

  • Ba chùm tia, năm loại phản xạ ngược, tám loại phản xạ
  • Chế độ BẬT Sáng/BẬT Tối
  • Bảo vệ ngắn mạch
  • Cấp độ bảo vệ IP67
  • Tiêu thụ điện năng ít hơn tới 60%

 

For the CX-400 Series, the user has a large selection of ultra compact Photoelectric Sensors at his disposal. The Series includes three thru-beam, five retro-reflective, four diffuse reflective and four trigonometric types with foreground/background suppression. With its new ASIC (application specific integrated circuit), the Sensors require up to 60% less energy than before.

Characteristics

  • Three Thru-Beam, Five Retro-Reflective, Eight Reflective Types
  • Light ON/Dark ON Modes
  • Short-Circuit Protected
  • IP67 Degree Of Protection
  • Up To 60% Less Power Consumption

 

Standard type

Type Thru-beam
Long sensing range
Model No. NPN output CX-411 CX-412 CX-413
PNP output CX-411-P CX-412-P CX-413-P
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 10 m
32.808 ft		 15 m
49.213 ft		 30 m
98.425 ft
Sensing object ø12 mm ø0.472 in or more opaque object (Note 4)
Hysteresis –
Repeatability
(perpendicular to sensing axis)		 0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption Emitter:
15 mA or less
Receiver:
10 mA or less		 Emitter:
20 mA or less
Receiver:
10 mA or less		 Emitter:
25 mA or less
Receiver:
10 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Output operation Switchable either Light-ON or Dark-ON
Short-circuit protection Incorporated
Response time 1 ms or less 2 ms or less
Operation indicator Orange LED
(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicator Green LED
(lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power indicator Green LED
(lights up when the power is ON)
(incorporated on the emitter)
Sensitivity adjuster Continuously variable adjuster
(incorporated on the receiver for thru-beam type)
Automatic interference
prevention function		 Two units of sensors
can be mounted
close together
with interference
prevention filters.
(Sensing range: 5 m
16.404 ft)		 –
Protection IP67 (IEC)
Ambient temperature – 25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed ),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated) Red LED Infrared LED
Peak emission wavelength 680 nm 0.027 mil 870 nm 0.034 mil 850 nm 0.033 mil
Material Enclosure: PBT (polybutylene terephthalate),
Lens: acrylic (CX-48□: polycarbonate),
Indicator cover: acrylic (CX-48□: polycarbonate)
Cable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver).
Weight Net weight Emitter: 45 g approx., Receiver: 50 g approx.
Gross weight 100 g approx.
Accessory –
Type Retroreflective
With polarizing filters Long sensing range For transparent object sensing
Model No. NPN output CX-491 CX-493 CX-481 CX-483 CX-482
PNP output CX-491-P CX-493-P CX-481-P CX-483-P CX-482-P
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 3 m
9.843 ft (Note 2)		 5 m
16.404 ft (Note 2)		 50 to 500 mm
1.969 to 19.685 in (Note 2)		 50 to 1,000mm
1.969 to 39.37 in (Note 2)		 0.1 to 2 m
0.328 to 6.562 ft (Note 2)
Sensing object ø50 mm
ø1.969 in or
more opaque,
translucent or
specular object
(Note 2, 5)		 ø50 mm
ø1.969 in or
more opaque
or translucent
object
(Note 2, 5)		 ø50 mm ø1.969 in or more transparent,
translucent or opaque object
(Note 2, 5)
Hysteresis –
Repeatability
(perpendicular to sensing axis)		 0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption 13 mA or less 10 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Output operation Switchable either Light-ON or Dark-ON
Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED
(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicator Green LED
(lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power indicator –
Sensitivity adjuster Continuously variable adjuster
(incorporated on the receiver for thru-beam type)
Automatic interference
prevention function		 Incorporated
(Two units of sensors can be mounted close together.)
Protection IP67 (IEC)
Ambient temperature – 25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed ),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated) Red LED Infrared LED
Peak emission wavelength 680 nm 0.027 mil 650 nm 0.026 mil 870 nm 0.034 mil
Material Enclosure: PBT (polybutylene terephthalate),
Lens: acrylic (CX-48□: polycarbonate),
Indicator cover: acrylic (CX-48□: polycarbonate)
Cable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver).
Weight Net weight 50 g approx.
Gross weight 80 g approx.
Accessory RF-230 (Reflector): 1 pc.
Type Diffuse reflective
Narrow-view
Model No. NPN output CX-424 CX-421 CX-422 CX-423
PNP output CX-424-P CX-421-P CX-422-P CX-423-P
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 100 mm
3.937 in
(Note 3)		 300 mm
11.811 in
(Note 3)		 800 mm
31.496 in
(Note 3)		 70 to 300 mm
2.756 to 11.811 in
(Note3)
Sensing object Opaque, translucent or
transparent object (Note 5)		 Opaque, translucent
or transparent
object (Note 5)
(Min. sensing object:
ø0.5 mm ø0.020 in
copper wire)
Hysteresis 15 % or less of operation distance (Note 3)
Repeatability
(perpendicular to sensing axis)		 1 mm 0.039 in or less 0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption 13 mA or less 15 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Output operation Switchable either Light-ON or Dark-ON
Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED
(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicator Green LED
(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Power indicator –
Sensitivity adjuster Continuously variable adjuster
(incorporated on the receiver for thru-beam type)
Automatic interference
prevention function		 Incorporated
(Two units of sensors can be mounted close together.)
Protection IP67 (IEC)
Ambient temperature – 25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed ),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated) Infrared LED Red LED
Peak emission wavelength 860 nm 0.034 mil 645 nm 0.025 mil
Material Enclosure: PBT (polybutylene terephthalate),
Lens: acrylic (CX-48□: polycarbonate),
Indicator cover: acrylic (CX-48□: polycarbonate)
Cable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable
(thru-beam type: both emitter and receiver).
Weight Net weight 50 g approx.
Gross weight 60 g approx.
Accessory –

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object.

3) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
4) If slit masks (optional) are fitted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected.
5) Make sure to confirm detection with an actual sensor before use.

Type Adjustable range reflective
Small spot
Model No. NPN output CX-441 CX-444 CX-442
PNP output CX-441-P CX-444-P CX-442-P
CE marking directive compliance EMC Directive, RoHS Directive
Adjustable range (Note 2) 20 to 50 mm 0.787 to 1.969 in 20 to 100 mm
0.787 to 3.937 in		 40 to 300 mm
1.575 to 11.811 in
Sensing range
(with white non-glossy paper)		 2 to 50 mm 0.079 to 1.969 in 15 to 100 mm
0.591 to 3.937 in		 20 to 300 mm
0.787 to 11.811 in
Hysteresis 2 % or less of operation distance
(with white non-glossy paper)		 5 % or less of operation distance
(with white non-glossy paper)
Repeatability Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper)
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption 20 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Output operation Switchable either Detection-ON or Detection-OFF
Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED (lights up when the output is ON)
Stability indicator Green LED (lights up under stable operating condition)
Distance adjuster 5-turn mechanical adjuster
Sensing mode BGS / FGS functions switchable with wiring of sensing mode selection input
Automatic interference
prevention function (Note 3)		 Incorporated
Protection IP67 (IEC)
Ambient temperature -25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed ),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Spot diameter ø2 mm ø0.079 in approx.
(at 50 mm 1.969 in distance)		 ø9 mm ø0.354 in approx.
(at 100 mm 3.937 in distance)		 ø15 mm ø0.591 in approx.
(at 300 mm 11.811 in distance)
Material Enclosure: PBT (Polybutylene terephthalate), Front cover: Polycarbonate, Indicator cover: Polycarbonate
Cable 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 55 g approx., Gross weight: 65 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object 2 mm 0.079 in [CX-444(-P): 15 mm 0.591 in, CX-442(-P): 20 mm 0.787 in], or more, away.
3) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.

Discontinued products

Basic type

 

Type Thru-beam
Small spot Long sensing range
Light-ON Dark-ON Light-ON Dark-ON
Model No. NPN output CX-411A-C05 CX-411B-C05 CX-412A-C05 CX-412B-C05
PNP output CX-411A-P-C05 CX-411B-P-C05 CX-412A-P-C05 CX-412B-P-C05
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 10 m 32.808 ft 15 m 49.213 ft
Sensing object ø12 mm ø0.472 in or more opaque object (Note 3)
Hysteresis –
Repeatability
(perpendicular to
sensing axis)		 0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption Emitter: 15 mA or less
Receiver: 10 mA or less		 Emitter: 20 mA or less
Receiver: 10 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Short-circuit protectionIncorporatedResponse time1 ms or lessOperation indicatorOrange LED (lights up when the output is ON)
(incorporated on the receiver for thru-beam type)Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)Power indicatorGreen LED (lights up when the power is ON)
(incorporated on the emitter)Sensitivity adjuster-Automatic interference
prevention functionTwo units of sensors can be mounted
close together with interference prevention
filters. (Sensing range: 5 m 16.404 ft)-ProtectionIP67 (IEC)Ambient temperature-25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 ℉Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminanceIncandescent light: 3,000 lx or less at the light-receiving faceEMCEN 60947-5-2Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosureVibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours eachShock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times eachEmitting element (modulated)Red LEDInfrared LED
Peak
emission
wavelength680 nm 0.027 mil870 nm 0.034 milMaterial0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m 1.640 ft longCable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft longCable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver)WeightNetEmitter: 20 g approx., Receiver: 20 g approx.Gross50 g approx.

Type Retroreflective
With polarizing filters
Light-ON Dark-ON
Model No. NPN output CX-491A-C05-Y CX-491B-C05-Y
PNP output CX-491A-P-C05-Y CX-491B-P-C05-Y
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 3 m 9.843 ft (Note 2)
Sensing object ø50 mm ø1.969 in or more transparent,
translucent or opaque object (Note 2, 4)
Hysteresis –
Repeatability
(perpendicular to
sensing axis)		 0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 13 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Short-circuit protectionIncorporatedResponse time1 ms or lessOperation indicatorOrange LED (lights up when the output is ON)
(incorporated on the receiver for thru-beam type)Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)Power indicatorGreen LED (lights up when the power is ON)
(incorporated on the emitter)Sensitivity adjuster-Automatic interference
prevention functionIncorporated (Two units of sensors can be mounted close together.)ProtectionIP67 (IEC)Ambient temperature-25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 ℉Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminanceIncandescent light: 3,000 lx or less at the light-receiving faceEMCEN 60947-5-2Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosureVibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours eachShock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times eachEmitting element (modulated)Red LED
Peak
emission
wavelength680 nm 0.027 milMaterial0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m 1.640 ft longCable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft longCable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver)WeightNet20 g approx.Gross30 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 reflector (optional). The sensing range represents the actual sensing range of the sensor. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object.

3) If slit masks (optional) are fitted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected.
4) Make sure to confirm detection with an actual sensor before use.

Standard type

 

Type Adjustable range reflective
Model No. NPN output CX-443
PNP output CX-443-P
CE marking directive compliance EMC Directive, RoHS Directive
Adjustable range (Note 2) 20 to 50 mm 0.787 to 1.969 in
Sensing range
(with white non-glossy paper)		 2 to 50 mm 0.079 to 1.969 in
Hysteresis 2 % or less of operation distance
(with white non-glossy paper)
Repeatability Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper)
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption 20 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Output operationSwitchable either Detection-ON or Detection-OFFShort-circuit protectionIncorporatedResponse time1 ms or lessOperation indicatorOrange LED (lights up when the output is ON)Stability indicatorGreen LED (lights up under stable operating condition)Distance adjuster5-turn mechanical adjusterSensing modeBGS / FGS functions switchable with wiring of sensing mode selection inputAutomatic interference
prevention function (Note 3)IncorporatedProtectionIP67 (IEC)Ambient temperature-25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed ),
Storage: -30 to +70 ℃ -22 to +158 ℉Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminanceIncandescent light: 3,000 lx or less at the light-receiving faceEMCEN 60947-5-2Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosureVibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours eachShock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times eachEmitting elementRed LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)Spot diameterø6.5 mm ø0.256 in approx.
(at 50 mm 1.969 in distance)MaterialEnclosure: PBT (Polybutylene terephthalate), Front cover: Polycarbonate, Indicator cover: PolycarbonateCable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft longCable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.WeightNet weight: 55 g approx., Gross weight: 65 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object 2 mm 0.079 in, or more, away.
3) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.

Thru-beam type

Type Appearance Sensing range Model No. (Note 1) Output
operation		 Emitting
element
NPN output PNP output
10 m 32.808 ft CX-411 CX-411-P Switchable
either
Light-ON
or
Dark-ON		 Red LED
Long sensing
range		 15 m 49.213 ft CX-412 CX-412-P Infrared
LED
30 m 98.425 ft CX-413 CX-413-P

Retroreflective type

Type Appearance Sensing range Model No. (Note 1) Output
operation		 Emitting
element
NPN output PNP output
With polarizing
filters		 3 m 9.843 ft
(Note 2)		 CX-491 CX-491-P Switchable
either
Light-ON
or
Dark-ON		 Red LED
Long sensing
range		 5 m 16.404 ft
(Note 2)		 CX-493 CX-493-P
For transparent
object sensing		 50 to 500 mm
1.969 to 19.685 in
(Note 2)		 CX-481 CX-481-P Infrared
LED
50 to 1,000mm
1.969 to 39.37 in
(Note 2)		 CX-483 CX-483-P
0.1 to 2 m
0.328 to 6.562 ft
(Note 2)		 CX-482 CX-482-P

Diffuse reflective type

Type Appearance Sensing range Model No. (Note 1) Output
operation		 Emitting
element
NPN output PNP output
100 mm 3.937 in CX-424 CX-424-P Switchable
either
Light-ON
or
Dark-ON		 Infrared
LED
300 mm 11.811 in CX-421 CX-421-P
800 mm 31.496 in CX-422 CX-422-P
Narrow-view 70 to 300 mm
2.756 to 11.811 in		 CX-423 CX-423-P Red LED

Adjustable range reflective type

Type Appearance Sensing range Model No. (Note 1) Output
operation		 Emitting
element
NPN output PNP output
Small spot 2 to 50 mm 0.079 to 1.969 in CX-441 CX-441-P Switchable either
Detection-ON
or
Detection-OFF		 Red LED
15 to 100 mm 0.591 to 3.937 in CX-444 CX-444-P
20 to 300 mm 0.787 to 11.811 in CX-442 CX-442-P
NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets.

Notes:

1) The model No. with “E” shown on the label affixed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver.
2) The sensing range of the retroreflective type sensor is specified for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object.
CX-491□ CX-493□ CX-481□ CX-483□ CX-482□
A 0 to 3 m
0 to 9.843 ft		 0 to 5 m
0 to 16.404 ft		 50 to 500 mm
1.969 to 19.685 in		 50 to 1,000 mm
1.969 to 39.37 in		 0.1 to 2 m
0.328 to 6.562 ft
B 0.1 to 3 m
0.328 to 9.843 ft		 0.1 to 5 m
0.328 to 16.404 ft		 100 to 500 mm
3.937 to 19.685 in		 100 to 1,000 mm
3.937 to 39.37 in		 0.8 to 2 m
2.625 to 6.562 ft

5 m 16.4 ft cable length types

5 m 16.404 ft cable length types (standard: 2 m 6.562 ft, basic: 0.5 m 1.640 in) are available.
When ordering this type, suffix “-C5” for the 5 m 16.404 ft cable length type to the model No.
(Excluding CX-44□ and basic type.)
(e.g.)
5 m 16.404 ft cable length type of CX-411-P is “CX-411-P-C5”

M8 plug-in connector type, M12 pigtailed type

M8 plug-in connector type and M12 pigtailed type are also available.
When ordering this type, suffix “-Z” for the M8 connector type, “-J” for the M12 pigtailed type to the model No.
(Please note that M12 pigtailed type is not available for CX-44□. Excluding basic type.)
(e.g.)
M8 connector type of CX-411-P is “CX-411-P-Z”
M12 pigtailed type of CX-411-P is “CX-411-P-J”

・Mating cables (2 cables are required for the thru-beam type)

 

Type Model No. Cable length Description
For M8 plug-in
connector type		 Straight CN-24A-C2 2 m 6.562 ft Can be used with all models
CN-24A-C5 5 m 16.404 ft
Elbow CN-24AL-C2 2 m 6.562 ft
CN-24AL-C5 5 m 16.404 ft
For M12 pigtailed
type		 2-core CN-22-C2 2 m 6.562 ft For thru-beam type emitter
(2-core)
CN-22-C5 5 m 16.404 ft
4-core CN-24-C2 2 m 6.562 ft Can be used with all models
CN-24-C5 5 m 16.404 ft

Mating cables

CN-24A-C2
CN-24A-C5
CN-24A-C2, CN-24A-C5

CN-24AL-C2
CN-24AL-C5
CN-24AL-C2, CN-24AL-C5

CN-22-C2, CN-22-C5
CN-24-C2, CN-24-C5
CN-22-C2, CN-22-C5, CN-24-C2, CN-24-C5

Package without reflector

NPN output type: CX-491-Y

Table of Model Nos.

Standard type

* Products colored in gray are scheduled to be discontinued.

 

Type Standard type
(cable length :
2m 6.562 ft)		 0.5 m 1.640 in
cable length types		 5 m 16.4 ft
cable length types		 M8 plug-in
connector type		 M12
pigtailed type
Thru-beam NPN output CX-411 CX-411-C05 CX-411-C5 CX-411-Z CX-411-J
PNP output CX-411-P CX-411-P-C05 CX-411-P-C5 CX-411-P-Z CX-411-P-J
NPN output CX-412 CX-412-C05 CX-412-C5 CX-412-Z CX-412-J
PNP output CX-412-P CX-412-P-C05 CX-412-P-C5 CX-412-P-Z CX-412-P-J
NPN output CX-413 CX-413-C05 CX-413-C5 CX-413-Z CX-413-J
PNP output CX-413-P CX-413-P-C05 CX-413-P-C5 CX-413-P-Z CX-413-P-J
Retroreflective NPN output CX-481 CX-481-C05 CX-481-C5 CX-481-Z CX-481-J
PNP output CX-481-P CX-481-P-C05 CX-481-P-C5 CX-481-P-Z CX-481-P-J
NPN output CX-482 CX-482-C05 CX-482-C5 CX-482-Z CX-482-J
PNP output CX-482-P CX-482-P-C05 CX-482-P-C5 CX-482-P-Z CX-482-P-J
NPN output CX-483 CX-483-C05 CX-483-C5 CX-483-Z CX-483-J
PNP output CX-483-P CX-483-P-C05 CX-483-P-C5 CX-483-P-Z CX-483-P-J
NPN output CX-491 CX-491-C05 CX-491-C5 CX-491-Z CX-491-J
PNP output CX-491-P CX-491-P-C05 CX-491-P-C5 CX-491-P-Z CX-491-P-J
NPN output CX-493 CX-493-C05 CX-493-C5 CX-493-Z CX-493-J
PNP output CX-493-P CX-493-P-C05 CX-493-P-C5 CX-493-P-Z CX-493-P-J
without
reflector		 NPN output CX-491-Y CX-491-C05-Y CX-491-C5-Y CX-491-Z-Y CX-491-J-Y
PNP output CX-491-P-Y CX-491-P-C05-Y CX-491-P-C5-Y CX-491-P-Z-Y CX-491-P-J-Y
NPN output CX-493-Y CX-493-C05-Y CX-493-C5-Y CX-493-Z-Y CX-493-J-Y
PNP output CX-493-P-Y CX-493-P-C05-Y CX-493-P-C5-Y CX-493-P-Z-Y CX-493-P-J-Y
Diffuse
reflective		 NPN output CX-421 CX-421-C05 CX-421-C5 CX-421-Z CX-421-J
PNP output CX-421-P CX-421-P-C05 CX-421-P-C5 CX-421-P-Z CX-421-P-J
NPN output CX-422 CX-422-C05 CX-422-C5 CX-422-Z CX-422-J
PNP output CX-422-P CX-422-P-C05 CX-422-P-C5 CX-422-P-Z CX-422-P-J
NPN output CX-423 CX-423-C05 CX-423-C5 CX-423-Z CX-423-J
PNP output CX-423-P CX-423-P-C05 CX-423-P-C5 CX-423-P-Z CX-423-P-J
NPN output CX-424 CX-424-C05 CX-424-C5 CX-424-Z CX-424-J
PNP output CX-424-P CX-424-P-C05 CX-424-P-C5 CX-424-P-Z CX-424-P-J
Adjustable
range
reflective		 NPN output CX-441 – – CX-441-Z –
PNP output CX-441-P – – CX-441-P-Z –
NPN output CX-442 – – CX-442-Z –
PNP output CX-442-P – – CX-442-P-Z –
NPN output CX-443 – – CX-443-Z –
PNP output CX-443-P – – CX-443-P-Z –
NPN output CX-444 – – CX-444-Z –
PNP output CX-444-P – – CX-444-P-Z –

Basic type

* Products colored in gray are scheduled to be discontinued.
* The basic type is the only standard specification product with a cable length of 0.5 m 1.640 in.

 

Type Basic type
(cable length : 0.5m 1.640 in)
Thru-beam NPN output CX-411A-C05
CX-411B-C05
PNP output CX-411A-P-C05
CX-411B-P-C05
NPN output CX-412A-C05
CX-412B-C05
PNP output CX-412A-P-C05
CX-412B-P-C05
Retroreflective NPN output CX-491A-C05-Y
CX-491B-C05-Y
PNP output CX-491A-P-C05-Y
CX-491B-P-C05-Y

Accessory

RF-230 (Reflector)
RF-230 (Reflector)
CX-411
CX-411A-C05
CX-411A-P-C05
CX-411B-C05
CX-411B-P-C05
CX-411-C05
CX-411-C5
CX-411-J
CX-411-P
CX-411-P-C05
CX-411-P-C5
CX-411-P-J
CX-411-P-Z
CX-411-Z
CX-412
CX-412A-C05
CX-412A-P-C05
CX-412B-C05
CX-412B-P-C05
CX-412-C05
CX-412-C5
CX-412-J
CX-412-P
CX-412-P-C05
CX-412-P-C5
CX-412-P-J
CX-412-P-Z
CX-412-Z
CX-413
CX-413-C05
CX-413-C5
CX-413-J
CX-413-P
CX-413-P-C05
CX-413-P-C5
CX-413-P-J
CX-413-P-Z
CX-413-Z
CX-421
CX-421-C05
CX-421-C5
CX-421-J
CX-421-P
CX-421-P-C05
CX-421-P-C5
CX-421-P-J
CX-421-P-Z
CX-421-Z
CX-422
CX-422-C05
CX-422-C5
CX-422-J
CX-422-P
CX-422-P-C05
CX-422-P-C5
CX-422-P-J
CX-422-P-Z
CX-422-Z
CX-423
CX-423-C05
CX-423-C5
CX-423-J
CX-423-P
CX-423-P-C05
CX-423-P-C5
CX-423-P-J
CX-423-P-Z
CX-423-Z
CX-424
CX-424-C05
CX-424-C5
CX-424-J
CX-424-P
CX-424-P-C05
CX-424-P-C5
CX-424-P-J
CX-424-P-Z
CX-424-Z
CX-441
CX-441-P
CX-441-P-Z
CX-441-Z
CX-442
CX-442-P
CX-442-P-Z
CX-442-Z
CX-443
CX-443-P
CX-443-P-Z
CX-443-Z
CX-444
CX-444-P
CX-444-P-Z
CX-444-Z
CX-481
CX-481-C05
CX-481-C5
CX-481-J
CX-481-P
CX-481-P-C05
CX-481-P-C5
CX-481-P-J
CX-481-P-Z
CX-481-Z
CX-482
CX-482-C05
CX-482-C5
CX-482-J
CX-482-P
CX-482-P-C05
CX-482-P-C5
CX-482-P-J
CX-482-P-Z
CX-482-Z
CX-483
CX-483-C05
CX-483-C5
CX-483-J
CX-483-P
CX-483-P-C05
CX-483-P-C5
CX-483-P-J
CX-483-P-Z
CX-483-Z
CX-491
CX-491A-C05-Y
CX-491A-P-C05-Y
CX-491B-C05-Y
CX-491B-P-C05-Y
CX-491-C05
CX-491-C05-Y
CX-491-C5
CX-491-C5-Y
CX-491-J
CX-491-J-Y
CX-491-P
CX-491-P-C05
CX-491-P-C05-Y
CX-491-P-C5
CX-491-P-C5-Y
CX-491-P-J
CX-491-P-J-Y
CX-491-P-Y
CX-491-P-Z
CX-491-P-Z-Y
CX-491-Y
CX-491-Z
CX-491-Z-Y
CX-493
CX-493-C05
CX-493-C05-Y
CX-493-C5
CX-493-C5-Y
CX-493-J
CX-493-J-Y
CX-493-P
CX-493-P-C05
CX-493-P-C05-Y
CX-493-P-C5
CX-493-P-C5-Y
CX-493-P-J
CX-493-P-J-Y
CX-493-P-Y
CX-493-P-Z
CX-493-P-Z-Y
CX-493-Y
CX-493-Z
CX-493-Z-Y

Sản phẩm tương tự

Cảm biến quang

Keyence PZ-G series Cảm biến quang

Brands:
Keyence

Cảm biến quang

Panasonic EX-20 Ver.2 Ultra-compact Photoelectric Sensor

Brands:
Panasonic

Cảm biến quang

Cảm biến quang Omron E3T series Photoelectric sensor

Brands:
Omron

Cảm biến quang

Panasonic EX-Z series Ultra-minute Photoelectric Sensor

Brands:
Panasonic

Cảm biến quang

Panasonic EX-10 ver.2 Ultra-slim Photoelectric Sensor

Brands:
Panasonic