Cảm biến áp suất Panasonic DP-100 Ver.2 Pressure Sensor

    Liên hệ VIET FA

    +84-964 654 007 sales@vietfa.com.vn Danh mục: Từ khóa: ,
    Maker: Panasonic
    DataSheet
    Brands:
    Brands

    Cảm biến áp suất Panasonic DP-100 Ver.2 có độ chính xác cao và đáng tin cậy với đa chức năng (chỉ báo hoạt động đầu ra điện áp tương tự). ‘Giá trị hiện tại’ và ‘giá trị ngưỡng’ có thể được kiểm tra cùng lúc để cải thiện tính dễ vận hành và kiểm tra trực quan. Màn hình 12 đoạn rõ ràng giúp việc này trở nên dễ dàng. Với chức năng sao chép độc đáo, thời gian làm việc và lỗi của con người được giảm thiểu. Có thể thực hiện nhiều loại ứng dụng khác nhau nhờ ba chế độ đầu ra và một loạt các mô-đun cho phép đo áp suất từ -1 đến +10 bar.

    Mới: Có sẵn loại đầu nối M8.

    Đặc điểm:

    • Độ phân giải cao và độ lặp lại
    • Các loại áp suất thấp và cao
    • Màn hình 3 màu kép (đỏ, lục, cam); công nghiệp đầu tiên đầu ra tương tự
    • Giá trị hiện tại và ngưỡng trong một chế độ xem
    • Chức năng sao chép; tiêu chuẩn toàn cầu mới
    • Ba chế độ hoạt động, cài đặt dễ dàng
    • Được trang bị chế độ ECO
    • Dễ dàng cài đặt
      Loại đầu nối M8

    High resolution pressure sensor with dual 3-colour display

    Highly accurate and reliable pressure sensor with multifunction (analogue voltage output operation indicator). ‘Current value’ and ‘threshold value’ can be checked at the same time to improve ease of operation and visual checking. A clear 12-segment display makes this easy. With the unique copy function, man-hours and human errors are reduced. Various types of applications can be realised thanks to three output modes and a wide range of modules allowing pressure from -1 to +10 bars to be measured.

    New: M8 connector type available.

    Characteristics:

    • High resolution and repeatability
    • Low and high pressure types
    • Dual 3-colour display (red, green, orange); industry first
    • Analogue output
    • Current and threshold value in one view
    • Copy function; new global standard
    • Three operation modes, easy setting
    • Equipped with an ECO mode
    • Easy installation
    • M8 connector type

     

    Accessories:

    • Connector
    • Connector attached cable 1, 3, 5m
    • Sensor mounting bracket
    • Panel mounting bracket
    • Front protection cover
    Type Standard Multi-function
    For low pressure For high pressure For low pressure For high pressure
    Model No. Asia
    (Note 2)    		 DP-101(-M)(-P) DP-102(-M)(-P) DP-101A(-M)(-P) DP-102A(-M)(-P)
    Europe DP-101-E-P DP-102-E-P DP-101A-E-P DP-102A-E-P
    M8 plug-in connector type DP-111-E-P-J DP-112-E-P-J DP-111A-E-P-J DP-112A-E-P-J
    North America
    (Note 2)    		 DP-101-N(-P) DP-102-N(-P) DP-101A-N(-P) DP-102A-N(-P)
    CE marking directive compliance EMC Directive, RoHS Directive
    Type of pressure Gauge pressure
    Rated pressure range -100.0 to +100.0 kPa -0.100 to +1.000 MPa -100.0 to +100.0 kPa -0.100 to +1.000 MPa
    Set pressure range -101.0 to +101.0 kPa
    -1.030 to +1.030 kgf/cm2
    -1.010 to +1.010 bar
    -14.64 to +14.64 psi
    -757 to +757 mmHg
    -29.8 to 29.8 inHg    		 -0.101 to +1.010 MPa
    -101 to +1,010 kPa
    -1.03 to +10.30 kgf/cm2
    -1.01 to +10.10 bar
    -14.6 to +146.4 psi    		 -101.0 to +101.0 kPa
    -1.030 to +1.030 kgf/cm2
    -1.010 to +1.010 bar
    -14.64 to +14.64 psi
    -757 to +757 mmHg
    -29.8 to 29.8 inHg    		 -0.101 to +1.010 MPa
    -101 to +1,010 kPa
    -1.03 to +10.30 kgf/cm2
    -1.01 to +10.10 bar
    -14.6 to +146.4 psi
    Pressure withstandability 500 kPa 1.5 MPa 500 kPa 1.5 MPa
    Applicable fluid Non-corrosive gas
    Selectable unit For low pressure: kPa, kgf/cm2, bar, psi, mmHg, inHg, For high pressure: MPa, kPa, kgf/cm2, bar, psi
    Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
    Power consumption Normal operation:
    720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
    ECO mode:
    480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)
    360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage)
    Comparative output
    [Comparative output 1,
    Comparative output 2
    (Note 3)]    		 <Asia (NPN output), North America (NPN output)>
    NPN open-collector transistor
    • Maximum sink current: 100 mA
    • Applied voltage: 30 V DC or less (between comparative output and 0 V)
    • Residual voltage: 2 V or less (at 100 mA sink current)<Asia (PNP output), Europe, North America (PNP output)>
    PNP open-collector transistor
    • Maximum source current: 100 mA
    • Applied voltage: 30 V DC or less (between comparative output and +V)
    • Residual voltage: 2 V or less (at 100 mA source current)
    Output operation / Output modes NO / NC (selectable by key operation) / EASY mode / Hysteresis mode / Window comparator mode
    Hysteresis Minimum 1 digit (variable) (however, 2 digits when using psi unit)
    Repeatability ±0.1 % F.S.
    (within ±2 digits)    		 ±0.2 % F.S.
    (within ±2 digits)    		 ±0.1 % F.S.
    (within ±2 digits)    		 ±0.2 % F.S.
    (within ±2 digits)
    Response time 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation
    Short-circuit protection Incorporated
    External input
    (Note 4)
    Auto-reference function /
    Remote zero-adjustment function    		 – <Asia (NPN output), North America (NPN output)>
    ON voltage: 0.4 V DC or less
    OFF voltage: 5 to 30 V DC, or open
    Input impedance: 10 kΩ approx.
    Input time: 1 ms or more<Asia (PNP output), Europe, North America (PNP output)>
    ON voltage: 5 V to +V DC
    OFF voltage: 0.6 V DC or less, or open
    Input impedance: 10 kΩ approx.
    Input time: 1 ms or more
    Analog voltage output
    (Note 4)    		 – Output voltage: 1 to 5 V DC
    Zero point: within 3 V ±5 % F.S.
    Span: within 4 V ±5 % F.S.
    Linearity: within ±1 % F.S.
    Output impedance: 1 kΩ approx.    		 Output voltage: 0.6 to 5 V
    Zero point: within 1 V ±5 % F.S.
    Span: within 4.4 V ±5 % F.S.
    Linearity: within ±1 % F.S.
    Output impedance: 1 kΩ approx.
    Analog current output
    (Note 4)    		 – Output current: 4 to 20 mA
    Zero point: 12 mA ±5 % F.S.
    Span: 16 mA ±5 % F.S.
    Linearity: within ±1 % F.S.
    Load resistance: 250 Ω (max.)    		 Output current: 2.4 to 20 mA
    Zero point: 4 mA ±5 % F.S.
    Span: 17.6 mA ±5 % F.S.
    Linearity: within ±1 % F.S.
    Load resistance: 250 Ω (max.)
    Display 4 digits + 4 digits 3-color LCD display
    (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
    Displayable pressure range -101.0 to +101.0 kPa
    -1.030 to +1.030 kgf/cm2
    -1.010 to +1.010 bar
    -14.64 to +14.64 psi
    -757 to +757 mmHg
    -29.8 to 29.8 inHg    		 -0.101 to +1.010 MPa
    -101 to +1,010 kPa
    -1.03 to +10.30 kgf/cm2
    -1.01 to +10.10 bar
    -14.6 to +146.4 psi    		 -101.0 to +101.0 kPa
    -1.030 to +1.030 kgf/cm2
    -1.010 to +1.010 bar
    -14.64 to +14.64 psi
    -757 to +757 mmHg
    -29.8 to 29.8 inHg    		 -0.101 to +1.010 MPa
    -101 to +1,010 kPa
    -1.03 to +10.30 kgf/cm2
    -1.01 to +10.10 bar
    -14.6 to +146.4 psi
    Indicator Orange LED
    (Comparative output 1 operation indicator, comparative output 2 operation indicator: Lights up when each comparative output is ON)    		 Orange LED
    (Comparative output 1 operation indicator: Lights up when comparative output is ON, Analog voltage output operation indicator: Lights up when setting)
    Protection IP40 (IEC)
    Ambient temperature -10 to +50 ℃ +14 to +122 ℉, Storage: -10 to +60 ℃ +14 to +140 ℉
    Ambient humidity 35 to 85 % RH (No dew condensation or icing allowed), Storage: 35 to 85 % RH
    Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
    Insulation resistance 50MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure
    Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each
    (when panel is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each)
    Shock resistance 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
    Temperature characteristics Within ±0.5 % F.S.
    (at +20 ℃ +68 ℉)    		 Within ±1 % F.S.
    (at +20 ℃ +68 ℉)    		 Within ±0.5 % F.S.
    (at +20 ℃ +68 ℉)    		 Within ±1 % F.S.
    (at +20 ℃ +68 ℉)
    Pressure port Asia: M5 female thread + R (PT) 1/8 male thread [excluding DP-□-M(-P)], Europe: M5 female thread + G 1/8 male thread, North America: M5 female thread + NPT 1/8 male thread
    Material Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) , Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber
    Connecting method / Cable length Connector / Total length up to 100 m 328.084 ft (less than 30 m 98.425 ft when conforming to CE marking) is possible with 0.3 mm2, or more, cable
    Weight Net weight: 40 g approx. (DP-10□-M(-P): 30 g approx.), Gross weight: 130 g approx. (DP-10□-M(-P):120 g approx.)
    Accessories CN-14A-C2 (Connector attached cable 2 m 6.562 ft): 1pc. (excluding M8 plug-in connector type)

    Notes:

    1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
    2) Model Nos. of Asia type having “-M” are short pressure port type. Model Nos. of Asia and North America types having the suffix “-P” are PNP output type.
    3) Only standard type is equipped with comparative output 2.
    4) Cannot be used at the same time.

    Standard pressure port type

    Type Rated pressure range Model No. Pressure port Comparative output
    Asia Standard For low pressure -100.0 to +100.0kPa DP-101 M5 female thread
    +
    R 1/8 male thread    		 NPN open-collector transistor
    For high pressure -0.100 to +1.000MPa DP-102
    Multi-function For low pressure -100.0 to +100.0kPa DP-101A
    For high pressure -0.100 to +1.000MPa DP-102A
    Europe Standard For low pressure -100.0 to +100.0kPa DP-101-E-P M5 female thread
    +
    G 1/8
    male thread    		 PNP open-collector transistor
    For high pressure -0.100 to +1.000MPa DP-102-E-P
    Multi-function For low pressure -100.0 to +100.0kPa DP-101A-E-P
    For high pressure -0.100 to +1.000MPa DP-102A-E-P
    M8 plug-in connector type Standard For low pressure -100.0 to +100.0kPa DP-111-E-P-J M5 female thread
    +
    G 1/8
    male thread    		 PNP open-collector transistor
    For high pressure -0.100 to +1.000MPa DP-112-E-P-J
    Multi-function For low pressure -100.0 to +100.0kPa DP-111A-E-P-J
    For high pressure -0.100 to +1.000MPa DP-112A-E-P-J
    North America Standard For low pressure -100.0 to +100.0kPa DP-101-N M5 female thread
    +
    NPT 1/8
    male thread    		 NPN open-collector transistor
    DP-101-N-P PNP open-collector transistor
    For high pressure -0.100 to +1.000MPa DP-102-N NPN open-collector transistor
    DP-102-N-P PNP open-collector transistor
    Multi-function For low pressure -100.0 to +100.0kPa DP-101A-N NPN open-collector transistor
    DP-101A-N-P PNP open-collector transistor
    For high pressure -0.100 to +1.000MPa DP-102A-N NPN open-collector transistor
    DP-102A-N-P PNP open-collector transistor

    Short pressure port type

    Type Rated pressure range Model No. Pressure port Comparative output
    Asia Standard For low pressure -100.0 to +100.0kPa DP-101-M M5 female thread NPN open-collector transistor
    DP-101-M-P PNP open-collector transistor
    For high pressure -0.100 to +1.000MPa DP-102-M NPN open-collector transistor
    DP-102-M-P PNP open-collector transistor
    Multi-function For low pressure -100.0 to +100.0kPa DP-101A-M NPN open-collector transistor
    DP-101A-M-P PNP open-collector transistor
    For high pressure -0.100 to +1.000MPa DP-102A-M NPN open-collector transistor
    DP-102A-M-P PNP open-collector transistor

    Type without connector attached cable

    Type without connector attached cable CN-14A-C2 is available.
    When ordering this type, suffix “-J” to the Model No. (Excluding M8 plug-in connector type and short pressure port type)
    (e.g.) Type without connector attached cable of DP-101-N is “DP-101-N-J”

    Accessory

    CN-14A-C2
    (Connector attached cable 2 m 6.562 ft)