Ống khí nén Nitta N2 Nylon tube

Maker: Nitta

Brands:Nitta

Usable fluid: air, water, general hydraulic oil
Operating temperature range: (air/general hydraulic oil) -40°C to +100°C, (water) 0°C to +70°C
Applicable fittings: Push One Series, Quick Seal Series
Negative pressure performance: -101.294kPa (0.1Torr)
Standard length: 20M, 100M
Relationship between operating temperature and maximum operating pressure (right graph)
The maximum operating pressure varies depending on the operating temperature (ambient temperature). Use outside the allowable range may cause accidents or premature destruction.
When using at temperatures other than room temperature (20°C), be sure to refer to the maximum operating pressure change rate shown in the graph on the right and use within that value.

Model	Outer diameter (mm)	Inner diameter (mm)	Maximum operating pressure (MPa at 20°C)	Minimum bend radius (mm)	Mass (g/m)	black	red	blue	yellow	green	milky white
N2-4-4X2	4	2	5.0	Ten	11	●	●	●	●	●	●
N2-4-4X2.5	4	2.5	3.3	15	8	●	●	●	●	●	●
N2-4-4X3	4	3	2.0	20	6	●	–	–	–	–	●
N2-4-6X4	6	Four	3.0	20	17	●	●	●	●	●	●
N2-4-6X4.5	6	4.5	2.0	20	13	●	●	●	–	–	●
N2-4-8X6	8	6	2.0	35	23	●	●	●	●	●	●
N2-4-10X7.5	T10	7.5	2.0	35	35	●	–	–	–	–	●
N2-4-10X8	10	8	1.6	45	29	●	●	●	●	●	●
N2-4-12X9	12	9	2.0	45	51	●	●	●	●	●	●
N2-4-16X13	16	13	1.6	100	70	●	–	–	–	–	●

N2 tube (inch size: group 1)

Model	Outer diameter (mm)	Inner diameter (mm)	Maximum operating pressure (MPa at 20°C)	Minimum bend radius (mm)	Mass (g/m)	black	milky white	red	blue	yellow	green
N2-1-1/8	3.18	2.25	2.3	13	Four	●	●	–	–	–	–
N2-1-3/16	4.76	3.48	2.3	16	9	●	●	●	●	●	●
N2-1-1/4	6.35	4.57	2.3	23	16	●	●	●	●	●	●
N2-1-5/16	7.94	5.9	2.3	29	23	●	●	●	●	●	●
N2-1-3/8	9.53	6.99	2.3	29	35	●	●	●	●	●	●
N2-1-1/2	12.7	9.56	2.3	45	58	●	●	●	●	●	●
N2-1-5/8	15.88	11.1	2.3	140	107	●	–	–	–	–	–

Model	Outer diameter (mm)	Inner diameter (mm)	Maximum operating pressure (MPa at 20°C)	Minimum bend radius (mm)	Mass (g/m)	black	milky white
N2-2-1/8	3.18	1.6	4.8	7	6	●	●
N2-2-3/16	4.76	2.42	4.8	12	14	●	●
N2-2-1/4	6.35	3.21	4.8	13	25	●	●
N2-2-5/16	7.94	4.02	4.8	13	39	●	●
N2-2-3/8	9.53	4.81	4.8	19	56	●	●
N2-2-1/2	12.7	6.4	4.8	26	99	●	●

	Note:	If water is used as the fluid, it may degrade the tubing depending on the type of additive it contains. Please contact us for details.
	Note:	When using water as a fluid, keep the surge pressure below the maximum operating pressure. Also, make sure it is not frozen.